Instructions / Assembly
Care and Cleaning
A) Place felt oor protectors under legs of moveable furniture. Chair casters should be rubber – not plastic or metal.
B) Place walk-off mats at entrances.
C) Dust mop as primary cleaning method. Occasionally wet mop with water only, using a well wrung out mop; DO NOT
pour liquid directly on oor or use an excessively wet mop that will puddle or leave moisture standing on the oor. If needed,
use a solution of 1 cup of vinegar per gallon of water OR 1/3 cup non-sudsing ammonia per gallon of water. DO NOT use
detergents, abrasive cleaners, soaps, waxes or polishes. A residential steam mop may be used provided the steam is
applied to a microber pad and not applied directly to the oor. Make sure to set the temperature of the steam mop to the
appropriate setting for laminate oors, or to the lowest setting. Steam mop in the length direction of the planks only. Use
correct hard surface vacuum tools. DO NOT use rotating beater bars, oor scrubbers, jet mops or similar products. Wipe
up spills immediately. DO NOT allow topical moisture to remain on the oor longer than the time specied in the
product warranty.
A
B
C
PERGO Outlast+ Install Instructions
2020_06_OP_UNI