Use and Care Guide

Pergo TimberCraft™ + WetProtect™ floors, like other fine furnishings in your
home, require proper care to keep them looking their best. When you
follow our easy cleaning and maintenance instructions, you'll find taking
care of your Pergo TimberCraft™ + WetProtect™ floor a snap!
Regular Maintenance
The surface layer of Pergo TimberCraft™ + WetProtect™ flooring is hard and
compact, so dirt and dust do not adhere to it easily. The following simple
steps are usually all it takes to keep your floor clean.
For general cleaning, use a dust mop or vacuum with the correct hard
surface attachment of your vacuum cleaner.
For heavier cleaning, occasionally wet mop with water only, using a well
wrung out mop.
DO NOT pour liquid directly on floor or use an excessively wet mop that will
puddle or leave moisture standing on the floor. Occasional wet mopping is
permitted for Pergo TimberCraft™ + WetProtect™ only.
If needed, use a solution of 1 cup of vinegar per gallon of water OR 1/3 cup
non-sudsing ammonia per gallon of water.
DO NOT use detergents, abrasive cleaners, soaps, waxes or polishes. There
is never a need to wax or refinish your Pergo TimberCraft™ + WetProtect™
floor.
DO NOT use rotating beater bars, floor scrubbers, steamers, jet mops,
buffers or similar products.
Protect the Floor
While Pergo TimberCraft™ + WetProtect™ is remarkably durable, there is of
course no such thing as an indestructible flooring material. There are a few
simple protective measures that are important to keep your floor looking
new.
Pergo® TimberCraft™ + WetProtect™ Laminate Floors Care and Repair