Installation Guide

PERGO
®
Portfolio
™
+ WetProtect
™
Horizontal Accent Wall Install Instructions
11
2018_0618_PORT_WP_INST
13. Repeat this process for each plank working your way up to the last row. (Figure 8)
14. For the last row of the installation, use painters tape to mark the stud location for brad nailing. Cut all planks in the
last row to the required width to complete the installation. Complete the installation as you have the earlier rows.
(Figure 8a)
15. Use quarter round for inside corners and ceiling. Finish with wall base board of your choice. (Figure 9)
8
8a
9
Quarter round
Wall base
Quarter round
Quarter round