Manualshelf

Installation Guide

ManualsBrandsPergo ManualsFlooringRustic Espresso Oak/Mainland Brown 3/4 in. Thick x 2-1/8 in. Wide x 78-3/4 in. Length Laminate 4-in-1 Molding
1234567
4 in 1 Molding for Flooring | English
Use Part #1
1. Leave a 1-1/8" (29mm) space between flooring as shown.
2. Install track in position with screws as shown. Leave ¼" (6mm) expansion space on
both sides of track.
3. Start at one end. Firmly push Part #1 down into track.
4. Continue to push down firmly into track, working from one end to the other.
Use Part #1 and Part #2
1. Leave a 1-3/8" (35 mm) space between laminate flooring and vertical edge as shown.
2. Install track in position with screws as shown. Leave ½" (12mm) expansion space between the
track and laminate flooring.
3. Hold Part #1 and Part #2 together as shown.
4. Start at one end and push down firmly into track while holding Part #1 and Part #2 together.
5. Continue to push down firmly into track, working from one end to the other.
Use Part #1 and Part #3
1. Leave a 1-3/8" (35mm) space between laminate flooring and hard surface as shown.
2. Install track in position with screws as shown. Leave ½" (12mm) expansion space between the
track and laminate flooring.
3. Hold Part #1 and Part #3 together as shown.
4. Start at one end and push down firmly into track while holding Part #1 and Part #3 together.
5. Continue to push down firmly into track, working from one end to the other.
A: T-Molding
B: Carpet Transition
C: Hard Surface Reducer