Manualshelf

Installation Guide

ManualsBrandsPergo ManualsFlooringClassic Auburn Oak/Royal Oak .75 in. Thick x 2.37 in. Wide x 78.7 in. Length Laminate 4-in-1 Molding
1234567
4 in 1 Molding for Flooring | English
Use Part #1 and Part #2
1. Leave a 1-3/8" (35 mm) space between laminate flooring and vertical edge as shown.
2. Install track in position with screws as shown. Leave ½" (12mm) expansion space
between the track and laminate flooring.
3. Hold Part #1 and Part #2 together as shown.
4. Start at one end and push down firmly into track while holding Part #1 and Part #2
together.
5. Continue to push down firmly into track, working from one end to the other.
6. Fill any space between end molding and vertical surface with 100% silicone sealant.
D: End Molding