User's Manual

11
Owner’s Guide PWF-100
Battery Backup System
When a charged battery is inserted in
the left charge port of the SmartStation
™
,
it will act as a cordless battery backup
system. In case of power failure, the re-
chargeable battery will allow your indoor
SmartStation
™
to function for approxi-
mately eight hours, giving you a chance to
secure your dog until power is restored.
Also works great for quick day trips where
power is not readily available.
Pair the PetLink
™
Collar & Smart-
Station
™
/Installing the Battery
Before you insert the charged battery in
the PetLink
™
Collar, ensure that the Smart-
Station
™
display reads — NO COLLAR
PAIRED, PRESS ANY KEY.
After fully charg-
ing, unscrew
the battery cap
turning counter
clockwise using
a coin or screw
driver. Insert the
rechargeable
battery with the positive side (+) in the up
position. You can determine the (+) side by
looking for the indented ring at the top of
the battery. DO NOT PUT ON THE BATTERY
CAP YET.
Now, press any key.
Follow the onscreen menu to to complete
the battery installation by replacing the
battery cap. Keep the PetLink collar and
SmartStation a few feet apart when pairing.
The two components should automatically
pair. The display will instruct you as to
whether the collar pairing was successful
or failed.
NOTE: Should your PetLink
™
collar lose
contact with the SmartStation
™
due be-
ing unplugged or loss of power without
battery backup, your PetLink
™
collar will
continually search at the maximum update
speed for the SmartStation
™
and resulting
in 12 hour battery life.
ADDING A 2nd PETLINK COLLAR
After pairing the fi rst PetLink
™
collar
(DOG1) to the SmartStation
™
you can follow
similar steps to program a 2nd dog’s collar:
Press the center SELECT button on the
SmartStation
™
keypad.
Press the DOWN arrow ( v ) until MENU:
COLLARS is displayed
Ensure that you have the battery in the
PetLink
™
collar with the positive side
facing out. You can determine the positive
side by the indented ring around the top
of the battery. DO NOT PUT ON THE BAT-
TERY CAP YET.
Press the right arrow (>). Press the up or
down arrow to select DOG 1 or 2. If you
have already successfully paired the fi rst
collar, you will want to select DOG2.
Follow the onscreen menu to insert the
battery into the DOG2 PetLink
™
collar and
replace the battery cap. Keep the PetLink
™
collar and SmartStation
™
a few feet apart
when pairing.
The display will instruct you as to whether
the collar pairing was successful or failed.
STEP 3