User's Manual

15
Owner’s Guide PWF-100
• Walk the PetLink
™
collar to the nearest
boundary location. Return to the Smart-
Station
™
and push the SELECT button.
Once you have selected the boundary
location, test the PetLink collar around
your property by approaching the bound-
ary location at 12, 6, 3 and 9 o’clock as il-
lustrated. Listen carefully for the warning
beep as you test the fence locations.
Adjust the location of the indoor Smart-
Station
™
or reset the system boundary as
required until you are satisfi ed with the
coverage area.
IMPORTANT: The distance measuring
accuracy between the SmartStation
™
and your PetLink
™
collar is approximately
three (3) feet. The collar may activate plus
or minus three feet from the exact loca-
tion of the boundary setting. Due to this
variance, you should leave a distance of
ten feet from your signal boundary to any
streets or sidewalks.
Training Your Dog
Please take your time training your dog
and complete each step of the process
to enjoy optimal performance from your
system. If you have questions along the
way, expert advise is only a call away
(1-866-900-2007).
The goal of fence training is to help you
teach your dog to identify and respect her
new fence, to make the training fair—so
your dog will understand the consequenc-
es of leaving and to make the training
fun—so your dog will enjoy staying and
playing on your property.
Completely trusting your dog with his WiFi
Fence will take place over the course of
about 3 weeks. The training is a small part
of the three weeks, the rest of the time is
just close supervision.
Time should be set aside to work with your
dog for 10-15 minutes, two times per day.
Both you and your dog will appreciate
short, fun lessons and make the training
more effective. There are six phases to
the training lessons:
LESSON 1: Back Away From the Fence!
6 Sessions
LESSON 2: Respect the Fence
1 Session
LESSON 3: Adding interesting distractions
8 Sessions
LESSON 4: Off Lead With Supervision
1 Week
LESSON 5: Off Lead Unsupervised
2 Weeks
12
6
39