- Chrysler Instruction Manual MP3 Car Adapter Aux2Car

VEHICLE INSTALLATION
Acura
Before connecting any cables to the
Aux2Car
you must set the dip switches to the
Aux2Car you must set the dip switches to the Aux2Car
correct position. If you set the dip-switches after you have connected cables to the
interface, you must disconnect and reconnect them for the
Aux2Car
to operate.
Aux2Car to operate.Aux2Car
DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE
Aux2Car
!!!
Aux2Car !!!Aux2Car
SETTINGS FOR
ALL ACURAS
1
2
3
4
5
6
7
8
on
off
off
on
off
off
off
on
•
All Models (1992-2002) – Connector behind the radio, use the
PX HCH2 cable and the
Aux2Car
settings above.
Aux2Car settings above.Aux2Car
• TL 1999 to 2002 use Honda cable behind the radio
• Acura NSX, SLX, and MDX (1996 and Up) – Not Compatible.
• Acura’s with navigation are not compatible.
OPERATION
Switch to the
Aux2Car
adaptor by pressing the CD button on the radio. This step may take
Aux2Car adaptor by pressing the CD button on the radio. This step may take Aux2Car
up to three minutes for the radio to initialize. Some radio models require pressing “Seek >”
once to start playing the auxillary source.
4