User Guide

31
Getting Started Wizard
Apply Settings
Click on the Finish button to continue.
The Default Discovery Task will now start to collect information from your network. For more
information on this task see
PerleVIEW Default Tasks .
TFTP Server By default, PerleVIEW will install its TFTP server on port 69. PerleVIEW
will use its TFTP server to transfer all files. Select use existing TFTP server
and Window File Sharing if you have an existing setup for file transfer.
PerleVIEW will use Windows file transfer to transfer files between
PerleVIEW and the TFTP server. Configured your TFTP server and port
number to transfer files between target devices and your TFTP server. If you
specify this method, you will need to provide your Windows network
credentials that have rights to the Windows network location specified.
Note: To use an existing Windows File server, specify the Windows
Network Location in Microsoft Windows UNC format (Universal Naming
Convention).
Example: \\ComputerName\SharedFolder\Resource
Windows
Network
Credentials
Specify your Windows Network Credentials of username, password and
domain name (if required).
If you have entered you own location for the repository and for the TFTP
server, the credentials must be valid for both of these.