Owner's manual

Configuring the Server

Configuring Trueport Baud

The Trueport Baud configuration window allows you to map the baud rate coming out of the serial

host to another baud rate that will run between the Device Server and the serial device. See

Appendix B, Utilities on page 115 for more information about Trueport.

Configuring the Hardware

You need to configure the ethernet interface that you are using to connect the Device Server to the

LAN.

Select the appropriate option:

Ethernet Speed and

Duplex

Syslog

Syslog client process in the Device Server.

DHCP/BOOTP

DHCP/BOOTP client process in the Device Server.

Define the ethernet connection speed at one of the following:

z auto—automatically detects the ethernet interface speed and duplex

z 10 Mbps Half Duplex

z 10 Mbps Full Duplex

z 100 Mbps Half Duplex

z 100 Mbps Full Duplex