User Guide

Applications
57
TCP mss option should decrease to 1452 bytes. Therefore when
configuring the router for PPPoE, the remote site NAT configuration
automatically adjust its TCP mss option to 1452 to accommodate this
requirement. To verify this value has been adjusted:
Location: Main
ÄConfiguration
ÄWAN Set-Up
ÄRemote Site Set-up
ÄProtocol Set-Up
ÄIP Parameters
ÄNAT Advanced Set-up
ÄTCP mss
Äenabled
ÄTCP mss value
Ä1452
Normally your ISP provider will provide you with an outgoing
username and password and to authenticate with their services. The
PPPoE remote site configuration needs to have the security section
configured with this ISP parameters to authenticate the PPPoE
connection.
Location: Main
ÄConfiguration
ÄWAN Set-Up
ÄRemote Site Set-Up
ÄSecurity Set-Up
ÄOutgoing Username
ÄISP provided username
ÄOutgoing PAP password
ÄISP provided password
ÄOutgoing CHAP password (if required by ISP)
ÄISP chap password