- Perle User Guide Network Adapter 833IS

Chapter 8: Configuring the User Database
Perle 833IS User Guide 143
■
Drops the physical connection if inactive, but not notify the application of
disconnect
■
Automatically reconnects if data is to be sent
Reconnect to the 833IS is driven solely by the client in this mode. The 833IS cannot
redial the client. In practice this is not a real limitation, as servers will typically only
send data in response to a request from the client. However, if you are using a client
application that supports unsolicited data from a server, you can configure the LAN
to LAN feature for use with a dial in client.
Enable Virtual Connection
Click on this box to enable a client virtual connection.
This feature is used by remote Dial-in clients to save packet charges. The client
drops the physical link to the 833IS when the line is idle but maintains the logical
end-to-end connection (IP/IPX). The client reestablishes the physical link whenever
there is end-to-end data to send. This feature must be supported by the Dial-In
Clients.
Protocols The Protocols screen is as follows: