- Perle User Guide Network Adapter 833IS

Control
224 Perle 833IS User Guide
Control
Indicates the start of control displays. Control is organized into System, Card, and
Network control displays.
Menu Description
Control Indicates the start of Control displays. Control is
organized into System, Card, and Network control
displays.
Password If the panel lock has been defined in the Manager, the
password must be entered here to access further control
screens.
System System Control Displays.
Save Config Saves your current configuration to NVRAM.
System Reset Causes system to restart same as the power up.
Reset to Default Deletes current configuration, sets server to factory default
mode.
View Resources Enables display of internal resources.
Network Network Control Displays.
IP Select IP Settings.
IP Address Set IP address of unit.
IP Subnet Mask Set IP Subnet Mask of unit.
Default Gateway Set address of Default Gateway.
IPX Select IPX Settings.
IPX Network
Number
Set WAN (internal) Network Number.
LAN
Interface
Enable/Disable
Select Enable or Disable to enable or disable yor LAN
connection.
Speed Set your LAN speed. Select Auto Detect, 10 Mb or 100 Mb
for Ethernet. Select 4 Mb or 16 Mb for Token Ring LAN.