- Perle User Guide Network Adapter 833IS

Chapter 4: Using the Perle 833IS Manager
Perle 833IS User Guide 49
5. Once the Dial-up session is connected, start the 833IS Manager.
Completing the
Connection
When the 833IS Manager connects to the network, it automatically locates all 833IS
IPX Servers and all defined 833IS IP servers on the network and displays them in the
Server List window.
To complete the connection to a server:
1. Highlight the Server that you wish to connect to and click Connect. The Log
On dialog box will appear. If you are connected by IP and the Server does not
appear in the list, you may need to define it to the Manager. See "Using IP" on
page 47.
2. Enter the User ID, Password and Server Password if configured for the
selected Server and click OK.
The default User ID for an unconfigured 833IS is “superusr”, with no password.
The User ID is case sensitive.
This User ID and password is valid for an unconfigured 833IS only. You will be
required to set up a User ID with Administration privileges or configure a server