User's Manual

Setting Up Users
52 IOLAN DS1/TS2 User’s Guide, Version 3.4
Setting Up Users
When you have a user who is accessing a device connected to a serial port from the network or who
is accessing the network from a device connected to a serial port through the IOLAN, you can create
a user account and configure the user’s access privileges. Notice that there is a Default user; the
Default user’s parameters are inherited by users accessing a serial port configured for the
Terminal
profile with the
Conenct to remote system option enabled.
To add a user account, click on the Users page in the navigation pane.
Click the Add button to create a user account.
To quickly add a user, fill out the field in the General tab and click OK.
See Chapter 8, Configuring Users on page 117 for more information about the other user parameters
you can configure.