User's Manual

Serial Port Profiles
92 IOLAN DS1/TS2 User’s Guide, Version 3.4
General Tab Field Descriptions
Configure the following parameters:
Terminal Type Specifies the type of terminal connected to the line.
Data Options:
z Dumb
z WYSE60
z VT100
z ANSI
z TVI925
z IBM3151TE
z VT320 (specifically supporting VT320-7)
z HP700 (specifically supporting HP700/44)
z Term1, Term2, Term3 (user-defined terminals)
Default: Dumb
Require Login When users access the IOLAN through the serial port, they must be
authenticated using the local user database.
Default: Enabled
User Service
Settings Button
After a user has been successfully authenticated, the IOLAN will connect to
the specified host using the specified protocol according to:
z the User Service parameter for locally configured users
z the Default User Service parameter for users who are externally
authenticated
See User Service Settings on page 95 for field descriptions of the various User
Service Settings.
Connect to Remote
System
When the serial port is started, the IOLAN will initiate a connection to the
specified host using the specified protocol. With this option, user
authentication will not be performed by the IOLAN.
Default: Disabled