Iolan Sds4 Hl Device Server Manual

314

Configuring a Fiber Optic Card

Overview

SCS IOLAN models support the ability to replace the second Ethernet interface with a fiber optic

connection.

Field Descriptions

Configure the following parameters:

No additional configuration is required for the fiber card.

The fiber card will now replace the second Ethernet interface on the unit. All configuration

parameters related to “Interface 2” will now apply to the fiber card. If the options card configuration

is changed to “None” or the card is removed from the PCI slot, the second Ethernet interface will be

come active again using the configuration parameters for “Interface 2”.

Card Specify the type of fiber card you will be using.

z KTI KG-500F—Gigabit fiber card.

z Transition Networks N-FX-SC5-02—100MB card.

The type selected must match the card installed in the PCI slot.