Iolan Sds4 Hl Device Server Manual

319
Management
Management
SNMP
Overview
If you are using SNMP to manage/configure the IOLAN, or to view statistics or traps, you must set
up a User in SNMP version 3 or a Community in SNMP version 1,2 to allow your SNMP manager to
connect to the IOLAN; this can be done in the DeviceManager, WebManager, CLI, or Menu. You
must then load the perle-sds.MIB (found on the CD-ROM packaged with the IOLAN) file into your
SNMP manager before you connect to the IOLAN.
SNMP Tab Field Descriptions
Configure the following parameters:
Note:
Ensure that the SNMP service found in the Security, Services page is enabled (by default it
is enabled).
Contact The name and contact information of the person who manages this SMNP
node.
Location The physical location of the SNMP node.
Community The name of the group that devices and management stations running SNMP
belong to. Community only applies to SNMP v1 and v2c