Network Card User Manual

Perle PoE/PoE+ 10/100 Ethernet Media Converter
Installation Guide
14
Operation
Status LED
The Perle PoE/PoE+10/100 Rate converting Media converters
have status LEDs located on the front panel of the unit.
PWR
On – Power is applied to the unit
Blinking (slow) – Loopback mode - fiber interface is in loopback mode
Blinking (fast) Power On failure. See LED Pattern to determine pattern
combination and failure cause
LED Pattern
LKF LKC 100 PSE
Off Off On On SFP incompatible
All other LED patterns
Internal hardware
failure
LKF- (Status on Fiber Link)
On – Fiber link is present
Off – No fiber link present
Blinking (fast) – Fiber link up and receiving data