Network Card User Manual

Perle PoE/PoE+ 10/100 Ethernet Media Converter
Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle Standalone PoE/PoE+ 10/100 rate
converting Media Converters (S-110P). These products have the
ability to convert 10/100Base-T cable connections (copper) to
100Base-X connection (fiber). The Perle media converters
function as a PoE switch, and support a variety of port
configurations. These media converters function as Power
Sourcing Equipment (PSE) and can power up one Powered
Device (PD) using standard UTP cables that carry Ethernet data.
The S-110P models are compatible with Powered Devices that
comply with the IEEE 802.3af standard and the S-110PP models
are compatible with Powered Devices that comply with both the
IEEE 802.3af and the 802at-2009 standards. The fiber connection
can be either single mode (SM) or multimode (MM) and can
operate over different wavelengths and distances, depending on
the model selected (see table below).
POE/POE+
PoE (P)
PoE+ (PP)
Connector
(xx)
Mode
Distance
Wavelength
(TX/RX)
S-110P-M2xx2
S-110PP-M2xx2
SC/ST
MM
2 km/1.2 mi.
1310 nm
S-110P-S2xx20
S-110P-S2xx20
SC/ST
SM
20 km/12.4 mi.
1310 nm
S-110P-S2xx40
S-110PP-S2xx40
SC/ST
SM
40 km/24.9 mi.
1310 nm
S-110P-S2xx80
S-110PP-S2xx80
SC/ST
SM
80 km/49.7 mi.
1550 nm
S-110P-S2xx120
S-110PP-S2xx120
SC/ST
SM
120 km/74.6.
1550 nm
S-110P-S1SC20U
S-110PP-S1SC20U
SC
SM
20 km/12.4 mi.
1310/1550 nm
S-110P-S1SC20D
S-110PP-S1SC20D
SC
SM
20 km/12.4 mi.
1550/1310 nm
S-110P-S1SC40U
S-110PP-S1SC40U
SC
SM
40 km/24.9 mi.
1510/1590 nm
S-110P-S1SC40D
S-110PP-S1SC40D
SC
SM
40 km/24.9 mi.
1590/1510 nm
S-110P-SFP
S-110PP-SFP
SFP
NOTE 1