Installation Manual

ManualsBrandsPerlegear ManualsElectronicsTV Wall Mount Extension Bracket, TV Mount Extender Fitting 16”-24” Wood Stud Extension Arm for Universal TV Wall Plate TV Centering Sliding Bracket Holds 132lbs by

V1.0

TV Wall Mount Extension Bracket

Instruction Manual

Thank you for choosing this Perlegear product! At Perlegear we strive to

provide you with the best quality products and services in the industry.

Should you have any issues, please don't hesitate to contact us.

Technical Support:

1-800-456-5231 Mon-Fri 10am - 5pm (PST) (USA) (CAN)

Other Info:

support@perlegear.com(US)

Model: PGUE1

Summary of content (8 pages)

PAGE 1
TV Wall Mount Extension Bracket Instruction Manual V1.0 Model: PGUE1 Thank you for choosing this Perlegear product! At Perlegear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us. Technical Support: 1-800-456-5231 Mon-Fri 10am - 5pm (PST) (USA) (CAN) Other Info: support@perlegear.
PAGE 2
IMPORTANT SAFETY INFORMATION Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our Technical Support line at 1-800-456-5231 or customer service at support@perlegear.com. CAUTION: Avoid potential personal injuries and property damage! • Do not use this product for any purpose that is not explicitly speciﬁed in this manual. • Do not exceed weight capacity.
PAGE 3
Tools Needed (Not lncluded) Stud Finder Tape Measure 7/32 in.(5.5 mm) Wood Drill Pencil 1/2 in.(13mm) Socket Wrench Drill Awl Level Supplied Parts and Hardware Warning: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact our Technical Support line at 1-800-456-5231 or customer service at support@perlegear.com.
PAGE 4
Step 1 Connect the TV Wall Mount (Not Included) to the Extension Bracket Fully unfold the extension bracket and make sure the two halves are ﬂushed with each other. 01 A Note: Do not ﬁrmly tighten the nuts to keep the sliding function. B Connect the TV wall mount (not Included) to the extension bracket by washer [A] and nut [B]. 1/2 in.
PAGE 5
2A-1 Awl (Not lncluded) ) 406mm 16 in.( m) 610m 24 in.( Use a stud ﬁnder (not included) to locate wood studs or use an awl (not included) to verify the edges. Mark the edge and center locations. 2A-2 HEAVY! You may need assistance with this step. Position the extension bracket [01] at your desired height and line up the holes with your stud center line. Level the extension bracket [01] and mark the holes. 2 9/16 in.(65 mm) 2A-3 7/32 in.(ø5.5 mm) Drill 4 pilot holes using a 7/32 in.(5.
PAGE 6
Step 3 Horizontal Sliding Adjustment To better position your mount and TV on your wall, the mount can be horizontally slided from side to side. After sliding the wall mount at at desired position, ﬁrmly tighten four nuts [B]. 1/2 in.
PAGE 7
PAGE 8
Thank you again for choosing this Perlegear product! All of us at Perlegear do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. If you have any questions please don't hesitate to contact us. Technical Support: 1-800-456-5231 Mon-Fri 10am - 5pm (PST) (USA) (CAN) Other Info: support@perlegear.