Installation Guide

PERLICK RESIDENTIAL COLUMN REFRIGERATION INSTALLATION INSTRUCTIONS
perlick customer service [phone] | 21
INSTALLING FILTERS
CARBON AIR FILTERS
Carbon air lters should be placed in the holder in the
perforated panel located in the top-rear of the cabinet (A).
NOTE: When installing carbon air lter in wine units, the top
rack will need to be removed to access the perforated panel.
1. Remove the lter from the plasc bag before installing into
the unit. Take care not to open or puncture the tyvek bag in the
casing.
2. Pull rmly to lower the carbon air lter panel.
3. Place the carbon air lter into the holder directly onto the
panel and close panel - push rmly to engage closure clips.
4. It is recommended to replace the carbon air lter every 3-6
months.
B
ETHYLENE FILTERS
Ethylene lters should be placed in the holder in top of the p-
out produce bin (B).
1. Remove the lter from the plasc bag before installing into
the unit. Take care not to open or puncture the tyvek bag in the
casing.
2. Open the p-out bin to access lter housing located on the
top of the bin.
3. Slide lter into housing and close p-out bin.
4. It is recommended to replace the ethylene lter every 3
months.