Planning Guide

INSTALLING PERLICK COLUMN REFRIGERATION

Designed specifically to be integrated into cabinetry, Perlick column refrigeration brings

commercial-grade performance and preservation to any style of kitchen. Columns can be installed

separately, or in side-by-side installations to create custom modular refrigeration.

The following diagrams show various ways to install Perlick column refrigeration and provide

information on producing custom overlay panels.

ADJACENT WALL MINIMUM

CLEARANCE REQUIREMENTS

27-3/4

ADJACENT WALL

OR STRUCTURE

4-1/8

27-13/16

STRUCTURE

CLEARANCE

90° OPEN

STRUCTURE

CLEARANCE

115° FULLY OPEN

If installing column next to adjacent wall,

take care to observe minimum required

clearances to avoid inteference when

opening the door. Please note the clearances

indicated are based on a standard 3/4” thick

door panel and Perlick Two Tone Pro Handle

(CR-PRO-HANDLE). Varying door depths

and dimensions of customer-provided

handle may change the required dimensions.

A 90° hinge stop pin (included with unit)

can be installed to prevent the door from

opening beyond 90°. Pin must be installed

prior to full integration. See installation

manual for instructions.

13-13/16

Measurements shown in inches (“)