Specification Sheet

8300 W. Good Hope Rd., Milwaukee, WI 53223 • [phone] • perlick.com/residential
Perlick is commied to connuous improvement. Therefore, we reserve the right to change specicaons without warning.
FORM NO. Z2504
REV. D-11/04/2019
CR24W | 24” SINGLE-ZONE WINE COLUMN - PANEL READY
PRODUCT SPECIFICATIONS
Appliance Dimensions
Exterior Width 23-3/4”
Exterior Depth 24”*
Exterior Height 83-11/16”
Required Cutout
Dimensions
Cutout Width 24”
Cutout Depth 24”
Cutout Height 84”
Depth with Door Open
49-3/4” (less door overlay installed)
Product Weight
534 lbs
Capacity
12.6 cu. .
Electrical
Requirements
Electrical Supply 115V, 60 Hz., 1
Phase, 2.3 amps
Electrical Service 15 amp dedicated
circuit
Power Cord/
Receptacle
NEMA 5-15
plug, 5’ /3 prong
grounding-type
Max Bottle Capacty
Single-Zone 94 (750 ml.)
TEMPERATURE RANGES
Red Wine Mode
Factory Set to 60° (Range 40°-68°F)
White Wine Mode
Factory Set to 50° (Range 40°-68°F)
Cellar Mode
Factory Set to 55° (Range 40°-68°F)
QUICK FEATURES
▪ Ready to accept custom or stainless steel panel
▪ Industry exclusive single temperature zone model for maximum
capacity
▪ Smart humidity control maintains consistent humidity levels
within the cabinet automacally.
▪ Touch-screen control streamlines the user experience. Enjoy
access to smart sengs for red, white and cellar temperatures,
or customize to your preference in 1° increments. Access
sengs for lighng, Sabbath mode and more with a single
touch.
▪ Triple-pane, UV-resistant glass provides protecon from light
▪ Brightly illuminated by white and blue roll-on theatre lighng
▪ Converble display shelf showcases 6 prized wine boles with
addional storage for 4 dessert (half sizes) wine boles when
angled up. Easily lays at to store 11 boles without addional
parts and pieces.
*Less panel. With typical 3/4” overlay panel installed, depth
becomes 24-3/4”
C
US
24"
4"
84"
4"
1/2"
3"
3"
10 3/4"
5 1/4"
27 5/8"
23 3/4"
49 3/4"
22 1/4"
90°
OVERLAY TEMPLATE
DIMENSIONAL LIMIT
83 5/8"
14 1/8"
66 1/2"
CABINET
OPENING
21 5/8"
1 7/8"
24"
ELECTRICAL
OUTLET
LOCATION
4 1/8"
*90° achieved when included hinge stop pin is installed. Pin
must be installed prior to full integraon
Max clearance required for
opened door is 49-3/4” when
opened to 90°* (dimensions
shown are without door
overlay installed)
(please note that door opens
to 115°)