Service Manual

Column Refrigeration Service Manual
Return to Table of Contents
79
8.6 Installing Filters
8.6.1 Carbon Air Filters
Carbonairltersshouldbeplacedintheholderin
the perforated panel located in the top-rear of the
cabinet (A).
NOTE:Wheninstallingcarbonairlterinwine
units, the top rack will need to be removed to
access the perforated panel.
1. Removethelterfromtheplasticbagbefore
installing into the unit. Take care not to open or
puncture the tyvek bag in the casing.
2. Pullrmlytolowerthecarbonairlterpanel.
3. Placethecarbonairlterintotheholder
directly onto the panel and close panel - push
rmlytoengageclosureclips.
4. It is recommended to replace the carbon air
lterevery3-6months.
8.6.2 Ethylene Air Filters
Ethyleneltersshouldbeplacedintheholderin
top of the tip-out produce bin (B).
1. Removethelterfromtheplasticbagbefore
installing into the unit. Take care not to open or
puncture the tyvek bag in the casing.
2. Openthetip-outbintoaccesslterhousing
located on the top of the bin.
3. Slidelterintohousingandclosetip-outbin.
4. Itisrecommendedtoreplacetheethylenelter
every 3 months.
B
A
Figure 8-6. Air Filter Installation