Specification Sheet

8300 W. Good Hope Rd., Milwaukee, WI 53223 • [phone] • perlick.com/residential
Perlick is commied to connuous improvement. Therefore, we reserve the right to change specicaons without warning.
FORM NO. Z2599
REV. F-5/21/2019
CR30R | 30” REFRIGERATOR COLUMN - PANEL READY
PRODUCT SPECIFICATIONS
Appliance Dimensions
Exterior Width 29-3/4”
Exterior Depth 24”*
Exterior Height 83-11/16”
Required Cutout
Dimensions
Cutout Width 30”
Cutout Depth 25”
Cutout Height 84”
Depth with Door Open
55-3/4” (less door overlay installed)
Product Weight
560 lbs
Capacity
16.6 cu. .
Electrical
Requirements
Electrical Supply 115V, 60 Hz., 1
Phase, 2.3 amps
Electrical Service 15 amp dedicated
circuit
Power Cord/
Receptacle
NEMA 5-15
plug, 5’ /3 prong
grounding-type
TEMPERATURE RANGES
Main Compartment
Factory Set to 38° (Range 34°-42°F)
Deli Drawer
Factory Set to 33° (Range 32°-37°F)
Meat/Fish Drawer
Fish Factory Set to 33° (Range 32°-37°F)
Meat Factory Set to 35° (Range 32°-37°F)
Tip-Out Produce Bin
Factory Set to 35° (Range 32° -37°F)
QUICK FEATURES
▪ Ready to accept custom or stainless steel panel
▪ Industry exclusive 4 independently-controlled temperature
zone model for precision preservaon of fresh foods
▪ Dual chamber air ltraon throughout
▪ Touch-screen control streamlines the user experience.
Enjoy access to smart sengs for a variety of fresh foods, or
customize to your preference in 1° increments. Access sengs
for lighng, Sabbath mode and more with a single touch.
▪ Brightly illuminated by white roll-on theatre lighng
▪ Frameless spill-proof shelving
▪ Tiered deli drawer provides storage for a variety of foods
▪ Tip-out produce bin provides ample storage for fresh produce
▪ Slide-in stainless steel pans provide space for marinang,
storing pre-made appezers or storing sous vide packets
*Less panel. With typical 3/4” overlay panel installed, depth
becomes 24-3/4”
C
US
*90° achieved when included hinge stop pin is installed. Pin
must be installed prior to full integraon
Max clearance required for
opened door is 55-3/4” when
opened to 90°* (dimensions
shown are without door
overlay installed)
PLEASE NOTE: When installing column adjacent to wall, a 2”
clearance is required if door opens towards the wall
(please note that door opens to
115° without hinge pin installed)