User Guide

© 2009
5
24” ADA-Compliant Series Operation / Installation Manual
Figure 4. Sliding Shelf Extender Tabs
Figure 5. Sliding Shelf Mounting Brackets
SHELVING
IMPORTANT: To achieve maximum performance, interior lou-
ver openings and fan guard openings should never be
obstructed.
Refrigerator
The single door unit comes standard with two black vinyl
coated adjustable full extension pullout shelves.
Wine Reserve
The single door unit comes standard with five full extension
black vinyl coated wine racks capable of storing 40 total wine
bottles and additional storage on the bottom for 8 more bot-
tles. Shelves are removable and adjustable to accommodate
oversized (magnum) bottles.
Beverage Center
The single door unit comes standard with two full extension
black vinyl coated wine racks and one industry exclusive full
extension pullout shelf allowing for storage of both wine and
beverages. Shelving positions are adjustable.
Adjusting Full Extension Shelving
1. Pull the shelf out to its farthest position. Locate the tabs
in the middle of both extenders (Figure 4). Lift one tab up,
while pushing the opposite tab down and pull shelf out.
2. Reposition each bracket separately. Grasp the middle of
the bracket, pull the front end up and out, then forward
to remove (Figure 5).
3. Place bracket at the desired position. Push the rear hook
into the rear key slot. Set front of bracket on the wall
hook.
4. Repeat for other bracket(s).
5. Push extenders completely into the unit. Align the shelf
grooves with the extenders and slide completely into the
unit.