Tap Installation Instructions

PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
perlick customer service [phone] | 7
Insert end of the snorkel up into the tower and screw air
scoop mounng bracket into vacated holes above the fan.
6.
Install the Air Scoop Kit. Start by removing the upper set of
screws located above the fan on the back wall of the cabinet.
Assemble components from the kit as follows – Insert black
snap bushing into air scoop mounng bracket, then insert
one end of the air snorkel through the snap bushing. A zip
e can be inserted behind the mounng bracket to keep the
tube in place.
NOTE: For Adara Towers, the air snorkel consists of a 3 inch
piece of black tubing and a 3 inch piece of clear tubing that
slides over each other and then is clamped using included
worm drive clamp. The black tube is inserted per the above
instrucons and secured with the included zip e. The clear
tube is installed over the air “T” from the dispensing head and
secured with the included worm drive clamp. See Figure 4 on
page 5 for illustraon.
4.
5.
INSTALLATION