Tap Installation Instructions

PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
2 | perlick.com/residential
CONGRATULATIONS
Congratulaons on your purchase of a Perlick high quality
residenal Beer Dispenser. Perlick has proudly manufactured
beer dispensing systems for over 50 years for bars, restaurants,
stadiums, arenas and large venues around the world. That same
technology is used in each and every residenal beer dispenser
we produce, assuring you’ll pour fresh, cold beer as the brewery
intended it to be enjoyed.
All Perlick products are built with commercial grade stainless
steel, providing you with the beauty and durability for a lifeme
of use. This installaon guide will show you how to properly
install the dispensing equipment on your Perlick Beer Dispenser.
We dedicate considerable me to ensure that our products
provide the highest level of customer sasfacon. If, however,
service is required, call Perlick at 800.558.5592. For your own
protecon, never return merchandise for credit without our
approval.
We thank you again for selecng a high quality Perlick Beer
Dispenser. Cheers!
C
US
IMPORTANT!
The installation of the actual beer dispenser
cabinet should happen prior to installing
the dispensing equipment. Refer to the
Installation Manual that accompanied the
Beer Dispenser for step-by-step installation
of the cabinet.
Keep CO2 cylinder away from heat. Rupture
disc vents at 122°F maximum.
Allow only properly trained and experienced
personnel to handle high pressure gas.
Do not drop or throw regulator or CO2
cylinder.
Do not apply oil to the regulator!
PLEASE NOTE
The following instructions are for both the
Draft Arm (standard tower) and the Adara
Signature Beer Tower. Some photos and
drawings may only show the Draft Arm, but
the instructions will also apply to the Adara
Signature Beer Tower unless noted.
INTRODUCTION
DANGER
!
DANGER
!
CAUTION
CAUTION