Tap Installation Instructions

PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
perlick customer service [phone] | 3
INSTALLATION OF DISPENSING EQUIPMENT
Open the tapping kit box and become familiar with its
components. The instrucons on pages 4 through 10 will
demonstrate how to properly install the tapping equipment on
your new Perlick Beer Dispenser.
Dispensing Head
Faucet Lead
Apply silicone to
boom ange
Air Distributor
Flange Sleeve
All hose connecons
use worm-drive
hose clamps (view
enlarged to verify)
Distributor is only on
mulple keg units,
each keg is connected
to a valve on the air
distributor. Single keg is
connected directly to the
regulator.
Keg
Keg Coupler
Beer Connecon
NOTE: Image does not accurately reect posions of the dierent
elements within the unit. Posions and hose lengths shown are
to clearly illustrate proper connecon methods only.
INSTALLATION