C-Series Operation & Installation Manual
18
Operation & Installation Manual
C-Series (HC24 models)
WOODEN WINE RACK TRIM FINISHING (optional)
All wine racks come with sleek stainless steel fronts. Unnished solid
hardwood fronts are optional and can be removed and replaced
with other wood to match your cabinetry. See Figure 19 (below) for
wine rack face details..
IMPORTANT NOTE: The unnished faces should be nished and
sealed. In many cases, stains and/or nishes have odors that may
be objectionable in an enclosed area. Do not stain or nish wood
faces while in unit. To remove the front wood face from the wine
shelf, simply pull out the wine shelf and remove the fasteners.
Finish as desired, and when completely dry, reinstall with fasteners.
Figure 19 - Wood wine rack trim design
Handle Installation
CAUTION
Handle mounting on wood overlay door should be mounted on
overlay panel only (not the door) to avoid damage to the factory
door.
1. Handle must be attached to overlay before mounting overlay
onto door. Mark rear of wood overlay panel with handle
fastening locations.
2. Drill through wood overlay panel at marked locations taking
care not to damage the wood overlay panel.
3. Countersink screw heads so screw heads are ush with back-
side of panel. Attach handle to overlay panel.
CAUTION
Proper wood working materials and equipment should be used
to avoid damage or errors in workmanship.
1. With the unit secured in position, open the door and make
sure panel’s pre-drilled holes align with door frame holes.
2. Loosely attach four corners of the overlay panel to the door
using #10 x 1” wood screws, installed through the door frame
from the rear.
3. Check for overall wood overlay panel t, position and func-
tion. Make minor adjustments as necessary. When panel is
properly aligned, tighten mounting screws securely. Install
the rest of the mounting screws and tighten securely.
CAUTION
Do not over-tighten wood overlay attachment screws as this
may damage the factory supplied door frame.
Wood Overlay Panel Installation
Scan the QR code to the right with
your smart phone to watch a How-To
video on how to install Wood Overlay
panels onto Perlick doors, otherwise,
follow the instructions below.