Installation Guide

PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
Perlick customer service [phone] | 7
Insert end of the snorkel up into the tower and screw air scoop
mounting bracket into vacated holes above the fan.
6.
Install the Air Scoop Kit. Start by removing the upper set of
screws located above the fan on the back wall of the cabinet.
Assemble components from the kit as follows – Insert black
snap bushing into air scoop mounting bracket, then insert
one end of the air snorkel through the snap bushing. A zip
tie can be inserted behind the mounting bracket to keep the
tube in place.
NOTE: For Adara Towers, the air snorkel consists of a 3 inch piece
of black tubing and a 3 inch piece of clear tubing that slides over
each other and then is clamped using included worm drive clamp.
The black tube is inserted per the above instructions and secured
with the included zip tie. The clear tube is installed over the air “T”
from the dispensing head and secured with the included worm
drive clamp. See Figure 4 on page 5 for illustration.
4.
5.
INSTALLATION