Installation Guide

3/12/2014
SW
RELEASE FOR PRODUCTION
JMP
COPYRIGHT 2001 PERLICK CORPORATION. ALL RIGHTS RESERVED.
Milwaukee, WI 53223
DRAWN
Perlick Corporation
95220
JMP 3/12/2014
SCALE
1:20
DATE
REVISIONS
THIS DOCUMENT/PUBLICATION/SOFTWARE/DRAWING CONTAINS PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF THE PERLICK CORPORATION. IT MAY NOT BE REPRODUCED OR TRANSMITTED IN ANY FORM, ELECTRONIC
OR MECHANICAL, INCLUDING PHOTOCOPYING, RECORDING, OR USED IN ANYINFORMATION STORAGE, TRANSMISSION, OR RETRIEVAL SYSTEM, WITHOUT WRITTEN PERMISSION FROM THE PERLICK CORPORATION
A
STACKING KIT INSTALLATION
Step 5: Remove (2) #10 sheet metal screws from the front of the top cabinet (These screws
will be used to attach the mounting bracket) Attach mounting bracket(s) to the front
of the cabinet using #10 sheet metal screws. Install latches into the grill bracket(s).
Remove (2) screws from front of cabinet.
using #10 sheet metal screws.
Attach grill mounting brackets
Install latches to grill mounting bracket.