Tapping Installation Manual

PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
Perlick customer service [phone] | 3
INSTALLATION OF DISPENSING EQUIPMENT
Open the tapping kit box and become familiar with its
components. The instructions on pages 4 through 10 will
demonstrate how to properly install the tapping equipment on
your new Perlick Beer Dispenser.
Dispensing Head
Faucet Lead
Apply silicone to
bottom ange
Air Distributor
Flange Sleeve
All hose connections
use worm-drive
hose clamps (view
enlarged to verify)
Distributor is only on
multiple keg units,
each keg is connected
to a valve on the air
distributor. Single keg
is connected directly to
the regulator.
Keg
Keg Coupler
Beer Connection
NOTE: Image does not accurately reect positions of the dierent
elements within the unit. Positions and hose lengths shown are to
clearly illustrate proper connection methods only.
INSTALLATION