MSDS

- 1 -
Material Safety Data Sheet
MSDS No: GB-1504
Page 1 of 6
PermaBase
®
BRAND Cement Board Products
Date: July 23,2012
Supersedes Date: July 1,2009
1. PRODUCT AND COMPANY INFORMATION
Manufacturer Information: For Emergency Product Information Call:
National Gypsum Company Director Quality Services
2001 Rexford Road (704) 551-5820 - 24 Hour Emergency Response
Charlotte, NC 28211 Website: www.nationalgypsum.com
Product Name:
PermaBase
PermaBase Flex
PermaBase UltraBacker
Use: Underlayment for Ceramic Tile on floors, countertops, EIFS systems.
Generic Descriptions: Gray cementitious material sandwiched between two layers of a fiberglass
mesh scrim or a fiberglass mat laminate with a reinforced edge.
2. HAZARDS IDENTIFICATION
Appearance and Odor: Gray solid with slight organic odor upon opening that dissipates quickly.
Contains no asbestos. HMIS Hazard Class No. 1, 0, 0.
Emergency Overview
PermaBase
®
BRAND Cement Board Products do not present an inhalation, ingestion, or contact health
hazard unless subjected to operations such as sawing, sanding or machining which result in the
generation of airborne particulate. Dust generated is alkaline, and could cause corrosive damage to skin,
tissues, and eyes. Wear eye and skin protection. This product also contains quartz (crystalline silica) as a
naturally occurring contaminant. It is recommended that a NIOSH approved particulate respirator be worn
whenever working with this product results in airborne dust exposure exceeding the prescribed limits.
(See Section 11 - Toxicological Information)
OSHA Regulatory Status
While this material is not considered hazardous by the OSHA Hazard Communication Standard (29CFR
1910.1200), this MSDS contains valuable information critical to the safe handling and proper use of the
product. This MSDS should be retained and available for employees and other users of this product.

Summary of content (6 pages)