Instructions / Assembly

15
Step 5
Caution: To avoid possible injury, two people are required to perform this step.
• Remove any wire ties holding the regulator and gas hose under the grill head, making sure the hose
hangs freely.
• With the aid of an assistant, carefully lower the grill head onto the pedestal.
• While your assistant steadies the grill head on the pedestal, use (4) M6x13 screws from the sides to
attach head to pedestal (see figure A).
• Attach the back rail to the back of the firebox & side panels with (4) M4x10 screws (see figure B).