Instructions / Assembly

25
Step 12
• LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank.
• Fill and leak check before attaching to the grill and regulator.
Place LP tank into hole in bottom shelf with tank collar opening facing to left side panel as shown.
Raise tank holder to hold the LP tank securely in place.
• Remove the plastic package from the lighting rod, place it on the back of the door.
• Roll the grill into place of operation. Once in place, press down on the locking levers of both casters with
brakes to lock the casters in place, preventing the grill from moving while grilling.
• Install one AA battery into the electronic ignition. Twist the igniter cap counter-clockwise, insert one AA
battery into the slot with the positive end facing out/up, and reattach the igniter cap by twisting
clockwise..