Instructions / Assembly

34
TOTAL GAS CONSUMPTION:
Total gas consumption (per hour) of PG-4030400LG grill with all burners on “HI”:
Main Burners 30,000 Btu/hr
Total 30,000 Btu/hr
GENERAL USE OF THE GRILL:
The grill burners encompass the entire cooking area and are side ported to
minimize blockage from falling grease and debris. Above the burners are stainless steel
radiated. The igniter knobs are located on the valve panel. Follow the lighting instructions
printed on the control panel.
USING THE GRILL:
Grilling requires high heat for searing and proper browning. Most foods are cooked at the
“HI” heat setting for the entire cooking time. However, when grilling large pieces of meat or
poultry, it may be necessary to turn the heat to a lower setting after the initial browning.
This cooks the food through without burning the outside. Foods cooked for a long time or
basted with a sugary marinade may need a lower heat setting near the end of the cooking
time.
1. Make sure the grill has been leak tested and is properly located.
2. Remove any packing material.
3. Light the grill burners using the instructions in this manual.
4. Turn the control knob to “HI” and preheat the grill for 15 minutes.
5. The grill lid is to be closed during the appliance preheat period.
6. Place the food on the grill and cook to the desired doneness. Adjust heat
setting, if necessary. The control knob may be set to any position between
“HI” and “LOW”.
7. The grill is designed to grill efficiently without the use of lava rocks or
briquettes of any kind. Heat is radiated by the flame tamers under the
cooking grids.
8. The hot grill sears the food, sealing in the juices. The longer the preheat, the
faster the meat browns.