Use and Care Manual

15
Step 5
 Remove any wire ties holding the regulator and gas hose under the grill head, making sure the hose hangs
freely. With the aid of an assistant, carefully lower the grill head onto the pedestal, use (4) M6 x13 screws
from sides to attach head to pedestal. See A.
 Attach the Back Rail to the back of Firebox & Side Panels with (4) M4x10 screws. See B.
 Open the lid, to attach the Lid Handle, align the Large Insulation Washer, Lid Handle Bezel, two Small
Insulation Washers and Lid Handle, attach them to the Lid with (2) M6x20 Screws and (2) M6 Flat Washers
from inside of the lid. See C.
M6x20 screw
M6 flat washer
Large insulation washer
Lid handle bezel
Small
insulation
washer
A
B
C