Use and Care Manual

Step 6

 Remove the 2 pre-installed screws from two sides of Control Panel. Attach the Front Side Shelf

Supports to each sides and reattach with previously removed 2 screws. See A & B.

 Underneath the firebox, fix the regulator to the right side panel with (1) Hose retain pin and (1)

Cotter pin. See C.

 Attach the Left & Right Back Side Shelf Supports to the rear sides of firebox with (4) M5x10

screws. See D & E.

 Note: Attach all the brackets so that the flanges on top.

D E