Use and Care Manual

21
Step 12
LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP
tank. Fill and leak check before attaching to grill and regulator. Place LP tank into hole in bottom
panel with tanking collar opening facing to right side panel as shown. Raise tank holder to hold
LP tank securely in place.
Remove the plastic package from the Lighting Rod, place it into the back of the door.
Roll grill into place of operation. Once in place, press down on the locking levers of both Casters
with Brake to lock casters in place, preventing grill from moving during grill operation.