Portable Square Charcoal Grill Instruction Manual For Outdoor Use Only Model No: PG-40C10 This product is sold by Permasteel Inc. If you are missing any parts or have question regarding this grill, please call our customer service dept. 1-888-287-0735 / M-F / 8AM -5PM PST Or email at: service@permasteel.
User Notes ⚫ Please read the manual carefully before using the product ⚫ Keep this user manual for future reference ⚫ Outdoor use only ⚫ Outer shell of the grill can be very hot, please make sure to keep children away ⚫ Do not move the product while in use Important Note ⚫ Please read this manual carefully and confirm that the grill has been properly installed and assembled. Failure to use this manual may result in serious personal injury and/or property damage.
Parts List 1. Handle 2. 1PC 4. Charcoal Pan 1PC 7. Side Panel 2PCS Lid 3. 1PC 5. Charcoal Tray Bracket 1 1PC 6. Charcoal Tray Bracket 2 2PCS 8. Back Panel 1PC Cooking Grate 2PCS 9.
Component Card Item No.
Installation Steps Step 1:Install the grill panel -- part 1 Insert a side panel (Part 7) into the card slot of front panel (Part 9) and back panel (Part 8) and buckle it. Installation method is as shown in the figure below. Step 2:Install the grill panel -- part 2 Insert the other side panel (Part 7) into the card slot of front panel (Part 9) and back panel (Part 8) and buckle it. Installation method is as shown in the figure below.
Step 3:Install charcoal tray bracket Use 8 pcs M4x8mm bolts (Part A) to install the 4pcs charcoal pan bracket 1 (Part 5) and charcoal pan bracket 2 (Part 6) in the positions shown in the figure below. The installation method is shown in the figure below. Step 4:Install bolts Turn over the grill body, screw securely 4 pcs M4x8mm bolts (Part A) in the holes on the top. The installation method is shown in the figure below.
Step 5: Install charcoal pan and cooking grate Turn over the grill body. Place the charcoal pan (Part 4) on the charcoal pan bracket. And then place the cooking grate (Part 3) with the handles on the grooves of the side panels. The installation method is shown in the figure below. Step 6: install lid handle Insert the lid handle(Part 1) into the holes on the lid(Part 2) , screw secure with 2 pcs M6x12mm bolts(Part B). The installation method is shown in the figure below.
Step 7:Install lid Place the lid on the grill body, lock with the lock. (This feature is for transport and storage.) The installation method is shown in the figure below. Tips:1. This is an open grill,please remove the lid before grilling. 2. The feature of the lid with handle is for transport and storage.
DANGER Risk of cuts Every care has been taken at the factory to ensure that there are no sharp edges on this unit. Be careful when handling the individual components of this unit to prevent accidents and injuries when assembling and starting up the unit. Before use, please note: Always select a secure, even surface and a suitable place for charcoal grilling. The unit may not be transported when warm. For safety reasons, the unit may not be operated using liquid fuel.