Use and Care Guide

HL-20181005,t&
A4
E
E
0
0
LO
co
N
210.00 mm
Owner's Manual
CONTACT US
Questions? Need parts?
We are here to help!
Permasteel Customer Service
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Monday-Friday
8:00am-5:00pm (Pacific Standard Time)
Owner's Manual
STEEL
80QT COOLER
MODEL#PS-203
ASSEMBLY INSTRUCTIONS:
TOOLS REQUIRED:
#2 Phillips screwdriver
Allen wrench
Please read the cooler manual carefully and assemble according to following steps.
Item Description
A Main Basin
B
Legs
C
Caster with brake
D Caster
E Lid
F Lid Handle
- - [ID
G
M5*40 Screw
H Handle
I
Bottle Opener
J
Bottle-cap Catcher
K M6*16 bolt
L M6*16 Hex Socket Bolt
1. Please make sure all parts are accounted for before beginning assembly
Qty
1
4
2
2
2
2
2
2
1
1
12
14
2. Place main basin (part A) up-side down on cean soft surface. Attach each leg & wheel
assembly (parts B,C &D) onto main basin using 3pcs truss screws
for each leg.
3.
4.
5.
6.
7.
Turn over entire assembly and press caster brake level to lock casters. Attach left &
right handles (part H) to main basin using 12 pcs truss screws. Tighten with wrench.
Attach bottle-cap catcher (J) to main basin by sliding it down
over 2 pre-installed bolts.
Attach bottle opener (part
I) to main basin using 2pcs M6*16 Hex Socket Bolt. Tighten with
a Phillips screwdriver.
Attach 2pcs lid handles (part F) to cooler lid by using 2pcs 5/32 X1/2" screws (part G)
Tighten with a Phillips screwdriver.
Clean inside
of cooler completely with a soft dry towel. Place cooler lid ( part E) on top of
main basin (A). Your cooler is now ready for use.
CARE AND MAINTENANCE:
Before using, clean the cooler completely with a soft dry towel,
take off the lid and put drinks and ice into the cooler.
Drain away all the water in the cooler, clean and dry the cooler
completely with a soft towel after use.
Indoor storage preferred while not in use.