Use and Care Guide
HL-20181005Jt&
A4
21
OX285mm
Owner's Manual
CONTACT US
Questions? Need parts?
We are here to help!
Permasteel Customer Service
Tel:
909-287-0730
Fax: 909-287-0733
Email: service@permasteel.net
Monday-Friday
8:00am-5:00pm (Pacific Standard Time)
80QT
CANE COOLER
MODEL#PS-208
ASSEMBLY INSTRUCTIONS:
TOOLS REQUIRED:
#2
Phillips
screwdriver
Crescent wrench
Please read
the
cooler manual carefully and assemble according
to
following steps.
-
--------,
]_
J~
,.,,~-
---
@
J,
1. Please make sure all parts are accounted
for
before beginning assembly.
2.
The handles
(part
4)
and
bottle
opener
(part6)
are pre-installed on cooler basin.
3.
Place main basin up-side down on clean
soft
surface attach each leg
(parts
9)
using
M6*12
bolt
screw
(part
8)
and
tighten
with
wrench
into
main basin, once
the
4 legs are installed, place
the
supporting rack
(parts
10)
on legs,
then
insert
&
tighten
each wheel
(parts
11&12)
into
the
leg.
4. Attach
bottle-cap
catcher
(parts
9)
to
main basin by sliding
it
down
over
2
pre-installed bolts.
5.
Attach 2pcs lid handles
(parts
1)
to
cooler lid by using 2pcs
5/32xl/2"screws
tighten
with
a Philips screwdriver.
6.
Clean inside
of
cooler
completely
with
soft
dry
towel. Place cooler lid
(parts
2) on
top
of
main basin
your
cooler
is
now ready
for
use.
CARE
AND
MAINTENANCE:
Before
using,
clean
the
cooler
completely
with
a
soft
dry
towel,
take
off
the
lid and
put
drinks
and
ice
into
the
cooler
.
Drain
away
all
the
water
in
the
cooler,
clean
and
dry
the
cooler
completely
with
a
soft
towel
after
use.
Indoor
storage
preferred
while
not
in
use
.