Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Copper Anti-Seize
Lubricant
AAM Revised 10/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Copper Anti-Seize Lubricant is a high temperature,
premium quality copper anti-seize and thread lubricant. It
contains a high percentage of micro-fine copper flakes in a
semi-synthetic, grease carrier and fortified with high quality
rust and corrosion inhibitors. Meets Mil Spec A-907.
PRODUCT BENEFITS
Permatex

Copper Anti-Seize was designed specifically for
use on stainless steel or similar alloys. It protects threaded
fasteners and fittings from heat, freezing, seizure or galling at
temperatures from -30°F to 1800°F. It may be used on
pumps, sensors, valves, nuts and bolts where extreme
conditions of heat exist. Permatex

Copper Anti-Seize also
provides good electrical conductivity.
TYPICAL APPLICATIONS
• Spark plug threads installed into aluminum heads
• Exhaust manifold and engine bolts
• Oxygen sensors
• Knock sensors
• Thermostat housing bolts
• Fuel filter fittings
• Battery cable connections
DIRECTIONS FOR USE
1. Clean mating surfaces before application.
2. For best results, apply to clean, dry surfaces.
3.
Clean surfaces with Permatex

Brake & Parts Cleaner.
4. Wire brush any loose surface rust.
5 Apply Copper Anti-Seize to the parts that require
protection.
6. Reassemble parts using normal torque values.
7. Wipe off excess material.
For Cleanup
1. Clean parts with disposable towel.
2. Clean hands with Permatex

brand hand cleaners.
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Grease
Appearance Copper metallic paste
Odor Light petroleum
Specific Gravity 1.2
Temperature Range,
_
C (
_
F) -22(-30) to 982(1800)
Viscosity, cPs 200,000 (base)
Flash Point, °C(°F) 149(300)
NFPA 704 Flammability Rating 1
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a lubricant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
31163 16 oz. brush-top bottle
09128 8 oz. brush-top bottle
09126 1 oz. carded tube
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.