Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Liquid Metal Filler
AAM Revised 11/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Liquid Metal Filler is a ready mixed, ready to use
adhesive and filler for filling and repairing metal surfaces.
Liquid Steel

Filler may also be used on wood and concrete
surfaces.
PRODUCT BENEFITS
• Easy to use
• No measuring or mixing
• No heating
• Excellent adhesion to galvanized metal
• Can be drilled, filed, sanded and painted
TYPICAL APPLICATIONS
• Oil pans
• Transmission pans
• Stake bed holes
• Door panels
• Cast metal parts
DIRECTIONS FOR USE
1. Surfaces to be filled should be clean and dry before
applying.
2. Roughen surfaces with sandpaper for better adhesion.
3.
Apply Permatex

Liquid Metal Filler as it is supplied in
the tube, leveling with a knife or spatula.
4. For filling deep holes, apply in 1/8 inch layers. Allow to
dry overnight between layers.
5. Once dry, the filler may be sanded, filed, drilled and
painted with enamel or lacquer.
6. The material may be burnished to give a metallic
appearance.
For Cleanup
1. Cleanup wet or dry, use acetone or nail polish remover.
2.
Clean hands with a dry cloth or Permatex

Fast
Orange
®
hand cleaner.
PROPERTIES OF UNCURED MATERIALS
Typical Value
Chemical Type Vinyl resin
Appearance Dark gray paste
Odor Penetrating
Specific gravity 1.85
Viscosity Flow is similar to syrup
Flash Point, TCC, °F0
TYPICAL CURING PERFORMANCE
Permatex

Liquid Metal Filler cures with solvent evaporation.
Drying time is 3 to 4 hours and full cure will take place within
24 hours.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
25909 3.5 fl. oz. tube, carded
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°
to 28°C
(46°
to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.