Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Silicone Spray
Lubricant
AAM Revised 07/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Silicone Spray Lubricant is a general purpose liquid
aerosol lubricant, primarily designed to reduce friction in non-
load bearing mechanical assemblies. The product repels water
and protects and renews rubber surfaces.
PRODUCT BENEFITS
• Lubricates to reduce friction and eliminate squeaks in all
types of mechanical mechanisms
• Protects and renews rubber surfaces
• Repels water
• Easy application, aerosol spray for maximum coverage,
extension tube for hard to reach areas.
• Prevents binding, sticking and deterioration
TYPICAL APPLICATIONS
• Windshield wiper linkage
• Automotive door and trunk rubber moldings
• Interior hinges, slides or springs
• Snow blower chutes
DIRECTIONS FOR USE
1. Provide adequate ventilation.
2. Shake can thoroughly before use. Note: There is no ball
agitator inside the can. For best results, aerosol can
should be at room temperature before spraying.
3. Holding can 8 to 10 inches from the surface for open
area lubrication, or 5 inches using the extension tube
provided for hard to reach areas, press the nozzle and
discharge the product on the assembly.
For Cleanup
1. Clean hands with Permatex

brand hand cleaners.
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Silicone
Appearance Clear liquid
Odor Mild
Flash Point Aerosol, contents under pressure,
consult MSDS
NFPA 704 Flammability Rating 4 (Highly flammable)
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
80070 (116DA) 16 oz. aerosol can
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
to 28
_
C
(46
_
to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.