MODEL 200/200P DUAL CHANNEL POWER AMPLIFIER OWNERS MANUAL
00/200P OWNERS MANUAL Before installing the 200P into your system, read the entire manual carefully. Endeavour to understand every detail by familiarising yourself with the controls and features as you read. You will find it easier to install using the relevant sections of this manual as a reference. PERREAUX Model 200P PERREAUX INDUSTRIES LTD RESERVES THE RIGHT TO CHANGE SPECIFICATIONS FOR THE IMPROVEMENT OF THIS PRODUCT.
2. Follow Instructions All installation, operation and instructions should be followed. other 3. Warnings All warnings on the 200P and in the Owners Manual should be strictly adhered to. 4. Water and Moisture The 200P should not be used near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc. 5. Rack / Wall / Ceiling Mounting The 200P should be rack mounted only in a heavy duty rack or stand that is recommended for audio equipment use.
to the normal use of your Compact Disc player, Tuner, Cassette Deck, etc. Always ensure that there is adequate ventilation around the 200P and sufficient space to circulate air both below and above the unit. Do not place unit directly onto carpeted surfaces. PRODUCT SUPPLIED WITHOUT MAINS PLUG - The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked with the letter E, or colour coded GREEN/YELLOW or GREEN.
Located in a small drawer below the MAINS/LINE RECEPTACLE is the MAINS/LINE FUSE. The drawer can only be opened when the mains/line cord is removed See the relevant section for more details on replacement fuses. 7. LOUDSPEAKER OUTPUT TERMINALS The 200P is equipped with two double sets of output terminals per channel to enable easy hook-up for bi-wiring of loudspeakers or additional loudspeakers. These are high quality gold plated terminals.
- Check that the volume control on your preamplifier or source component is set to zero then turn on the preamplifier. - Connect the female end of the 200P mains/line cord to the mains/line input receptacle (6). Plug the male end into the closest available power point and switch on the mains/line power. temperature around the 200P to exceed 40º Celsius (105º Fahrenheit.
If you require the voltage setting to be altered, e.g. relocation to another area, city or country, or extraordinarily high or low voltages, contact your Perreaux dealer. This modification must only be performed by qualified service personnel. Note: Always ensure the unit is disconnected from the Mains/Line supply before any covers are removed. MAINS/LINE FUSE The Perreaux 200P is equipped with a user serviceable mains/line fuse. Above the mains/line cord is the mains/line fuse holder.
