Industries 750 Monoblock Power Amplifier Owners Manual

Unpacking and Placement

The 750 is packaged for maximum protection. Please carefully read the

instructions below before proceeding to unpack the unit. Be extremely careful.

Unpacking

Procedure

 Inspect both ends of the cardboard box and open at the end without the

central staple by slitting the reinforced tape at either side.

 Fold back the flaps and tip the package on end and the inner box will

slide out.

 Lay the inner box down flat and upright, open it conventionally by

separating the top tray from the bottom.

 The product can now be removed from the bottom packaging. This will

be easier if you have someone to help you by holding the base of the

box.

 Alternately, the bottom tray and amplifier could be tipped upside down

and the bottom packaging removed. If opened in this manner, please

ensure that you turn the contents over again.

Note:

Be very careful to secure the unit if you are planning to flip the package

upside down.

 Remove the two white polystyrene protectors off either side of the

amplifier, leaving the black material covering.

 Pull back the material and remove the protective black tissue from the

front panel.

The amplifier is now unpacked and ready for further installation.

Note:

Please retain all packaging material for future transport.

Box

Contents

1 x 750 Power amplifier

1 x 750 Product manual

1 x Detachable AC power cord

3 x Performance analysis charts

Placing

Your 750

The 750 should generally be placed close to your preamplifier, keeping the

interconnect cabling short.

We strongl

y recommend keeping the 750 on it’s own separate shelf to allow for

proper ventilation.