Specifications

7
1
11
1 Unpacking and Placement
Unpacking
Procedure
The SXD2 is packaged for maximum protection. To open, sit the
box upright and cut the reinforced tape at the top of the box. The
product can now be removed.
Pull the foam protecting end-caps off either side of the unit and
remove the black material covering.
The SXD2 USB DAC is now unpacked and ready for further
installation.
Note:
Please retain all packaging material for future transport.
Box
Contents
1 x SXD2 USB DAC
1 x Product manual
3 x Performance analysis charts
1 x USB cable
1 x BNC to RCA adaptor
1 x Detachable AC power cord
Placing Your
SXD2
The SXD2 should generally be placed close to your source or
input equipment, thus keeping interconnect cabling between the
SXD2 and input component as short as practical. This will
reduce the inputs susceptibility to radio frequency interference
and the negative effects associated with long cables.
Ventilation
Requirements
The SXD2 is a digital device incorporating a low power
amplifier. Ventilation requirements are not considered an
important factor in product placement.
In the event that the SXD2 is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Physical Dimensions section of the manual (Chapter 12).